Skip to content

DIN 862 IP54 Digital Caliper, 0-300 mm

10-01-084

Price on request
Submit an inquiry to get a reference quote for this product.
Options
0-150x0.01mm
0-200x0.01mm
0-300x0.01mm
Quantity
Stock 0

Product Details

Product Details

This family is built to DIN 862 with an IP54 housing, aimed at everyday measurement on machines where dust and splashing coolant are present. Three metric ranges cover 150 mm, 200 mm and 300 mm with a 0.01 mm display step, all sharing the same square beam, four-button keypad and blue housing.

Model Comparison

Model / Art NoMeasuring RangeAccuracyResolution
10-1121-5330-150 mmNot specified0.01 mm
10-1221-1430-200 mmNot specified0.01 mm
10-1221-1530-300 mmNot specified0.01 mm

Detailed Description

The beam is stainless steel in a square section, which holds the slider square to the scale over the full travel and gives the depth rod a flat seating face. The depth rod is square in section and runs in the beam slot.

The housing is a moulded 3V pattern in blue, sealed to IP54 against dust and splashing liquid. Four buttons on the front face cover power, millimetre-inch switching, zero setting and hold, and the display is a plain LCD. There is no thumb roller; the slider is moved by hand and locked with the clamp screw.

DIN 862 is the governing standard for the family. Each caliper is supplied with a customer-specific instruction sheet, a certificate, and a battery that meets IEC 60086. The rear of the beam carries a serial number for traceability.

Every unit is bagged and packed with its accessories in a blue plastic case carrying a printed brand mark and a blue paper sleeve. Carton quantity follows the range: 50 pieces for the 150 mm model, 40 pieces for the 200 mm model and 25 pieces for the 300 mm model, with shipping marks on the side of each carton.

Technical Specifications

  • Category: Digital caliper
  • Measuring Range: 0-150 mm / 0-200 mm / 0-300 mm
  • Accuracy: Not specified
  • Resolution: 0.01 mm
  • Material: Stainless steel beam, moulded housing
  • Display: LCD, four-button keypad
  • Output: No data output
  • Structure Feature: IP54 housing, square beam, square depth rod, no roller, serial number on beam rear
  • Standard: DIN 862
  • Brand: OEM

Key Features

  • DIN 862 construction with an IP54 housing for dusty and coolant-splashed work areas.
  • 0.01 mm display step across all three metric ranges.
  • Square stainless beam and square depth rod for outside, depth and step measurement.
  • Four-button keypad for power, unit switching, zero and hold, with no thumb roller to drift.
  • Battery specified to IEC 60086, supplied with a test certificate and customer instruction sheet.
  • Serial number at the rear of the beam, carton quantities matched to each range.

Applications

  • Outside measurement of shafts, pins, plate and machined features at the machine.
  • Depth and step checks in slots, recesses and mould cavities.
  • In-process inspection where coolant splash and metal dust are present.
  • Receiving and first-article inspection in metalworking and equipment assembly.
  • General workshop measurement where a 0.01 mm digital readout is preferred to a vernier scale.

Selection Advice

Take the shortest range that spans the work; the 150 mm caliper handles bench work, 200 mm covers most turned parts, and 300 mm is needed once the workpiece exceeds a hand span. Resolution is 0.01 mm, the smallest display increment, while accuracy is not stated for this family, so tolerances tighter than a general workshop figure should be confirmed against a certified standard before relying on the caliper. A digital caliper reads faster and avoids parallax; a vernier caliper needs no battery and survives conditions where a display would be unreadable. For consistent sub-0.02 mm work, use a micrometer or a gauge instead.

FAQ

Which model covers a 260 mm part?

The 0-300 mm model. The 200 mm caliper will not open far enough.

What accuracy should I expect?

Accuracy is not specified for this family; 0.01 mm is the resolution, not the tolerance. Check critical dimensions against a certified standard or specify a caliper with a stated accuracy.

Is the housing really protected against coolant?

It is rated IP54, which covers dust ingress and splashing liquid. It is not intended for immersion or for continuous washdown.

Does it have a data output port?

No. Readings are taken from the display; a caliper with a data interface should be specified separately if readings must be logged electronically.

Can the case and instruction sheet be customised?

The caliper ships with a customer-specific instruction sheet, a certificate and a printed brand mark on the case. Further OEM marking or packaging options should be confirmed with the supplier before ordering.