Stainless Steel Digital Brake Disc and Pad Inspection Caliper
10-01-064
Product Details
Product Details
This digital caliper checks brake disc thickness and brake pad thickness in automotive service and quality inspection. A stainless steel body, 1.5 V plastic housing, and thumb roller support jaw movement, with one pointed jaw and one flat jaw at a measuring depth of 91.5 mm. Readings are available in millimeters, inches, and fractions, without data output.
Model Comparison
| Model / Art No | Measuring Range | Accuracy | Resolution |
|---|---|---|---|
| 10-4212-425 | 100 mm / 4" | Not specified | 0.01 mm / 0.0005" |
Detailed Description
The instrument uses a stainless steel structure and a 1.5 V plastic housing. A thumb roller moves the slider. Measuring depth is 91.5 mm. One measuring end is pointed and the other is flat, which suits contact on a brake disc face and on a brake pad.
Three buttons control the display: OFF/ON, ZERO, and mm/inch/F. The unit button selects millimeters, inches, or fractions. Fraction readings are shown without reduction. The caliper has no data-output port, connector, or wireless transmission.
No battery is installed in the instrument. The pack includes two spare batteries, a manual, and a desiccant in a black plastic box, together with the bagged caliper. A custom film can be applied, and a serial number is engraved on the back of the beam at the tail. Documented pack quantities are 10 pieces per inner box and 50 pieces per carton.
The caliper is supplied to an industry standard. Accuracy is not stated, so the listed resolution must not be used as the acceptance tolerance.
Technical Specifications
- Category: Caliper
- Measuring Range: 100 mm / 4"
- Accuracy: Not specified
- Resolution: 0.01 mm / 0.0005"
- Material: Stainless steel body with a 1.5 V plastic housing
- Display: Digital, with OFF/ON, ZERO, and mm/inch/F buttons; fraction readings are not reduced
- Output: No data output
- Structure Feature: Thumb roller; 91.5 mm measuring depth; one pointed jaw and one flat jaw; serial number engraved on the beam tail
- Standard: Industry standard
- Brand: OEM
Key Features
- Stainless steel body with a 1.5 V plastic housing and a thumb roller
- Pointed and flat jaws with 91.5 mm measuring depth for disc and pad contact
- Three-button display for power, zero, millimeters, inches, and unreduced fractions
- Measuring range of 100 mm / 4" and resolution of 0.01 mm / 0.0005"
- No data output
- Documented custom film and a serial number engraved on the beam tail
Applications
- Brake disc thickness inspection
- Brake pad thickness inspection
- Automotive workshop and service checks
- Incoming inspection of brake components
Selection Advice
This family is offered in one measuring range, 100 mm / 4". That capacity suits typical brake disc and brake pad thickness checks rather than long external measurements. A longer general-purpose caliper is the alternative when the workpiece exceeds this range.
Only one resolution is listed. The value 0.01 mm / 0.0005" is the default resolution for this dual-unit range format. It is the reading increment, not a tested accuracy. Accuracy is not specified, so inspection limits should come from a stated accuracy or from your own calibration.
Choose this digital caliper when zeroing and metric, inch, and fraction switching are required. A vernier caliper or a dial caliper is the usual alternative when a digital display is unnecessary. For finer thickness checks, consider a micrometer. For hole or recess depth, consider a depth gauge.
FAQ
Which model is available?
One model is available, art no. 10-4212-425, with a measuring range of 100 mm / 4".
Is resolution the same as accuracy?
No. Resolution is 0.01 mm / 0.0005", the default reading increment for this metric and inch range. Accuracy is not specified, and resolution must not be used as the acceptance tolerance.
Does this caliper provide data output?
No. It is without data output. The buttons control power, zero, and metric, inch, or fraction display only.
Can it display millimeters and inches?
Yes. The mm/inch/F button selects millimeters, inches, or fractions. Fraction readings are displayed without reduction.
Where is it typically used?
It is used for brake disc and brake pad thickness inspection in automotive service and quality control.
Can the caliper be customized?
A custom film and a serial number engraved on the beam tail are documented. Confirm any further marking, logo, or packaging changes with the supplier before ordering.